Category Archives: Punches

Quick and easy masculine card 

07 Monday Mar 2016

Posted by in Birthday, Cards, Masculine, Modern Label, Punches, Word Window

≈ 2 Comments

Tags

,

Hi

I had to make a card for a male friend’s 40th birthday on the weekend.  And, in classic Caro style, I literally had 5 minutes to do it! 

  
Cutting card stock to 26 X 13cm makes a square card that fits Stampin’ Up! Square envelopes, and a 12.5 X 12.5 cm bit of paper made the card rest of the card.  Happy Birthday was stamped with the Teeny Tiny Sentiments stamp set, and punched with the word window and modern label punches.  The card stock was Island Indigo. 

Go to woah in 5 minutes – gotta be happy with that! 

Caro

Cards using a gift bow board punch

08 Monday Feb 2016

Posted by in Birthday, Cards, General occasion, Gift bow, Kids cards, Punches, Using up scraps

≈ Leave a comment

Tags

, ,

Hi

On the weekend I found a bit of time to make some cards.  I pulled out my gift bow punch and decided to make some cards using up my scrap stash.  Here is one with a plain bow:

  
Cute, but I decided it wasn’t quite pretty enough, so back to the stash for some “bling” and voila!

  
   
 
Cute quick cards that took about 5 mins each to put together.  

Thanks for reading đŸ™‚

Caro x 

Star Wars 30th birthday card

06 Saturday Feb 2016

Posted by in 1 3/4 circle, 3D / pop up, Birthday, Jewellery tag, Masculine, Punches, Word Window

≈ 2 Comments

Tags

, , ,

Hello

I am spending a rainy Saturday afternoon making some cards – and I thought I’d show you one I made for my brother, who is turning 30 this week.  

He is a huge Star Wars fan, and also a bit of a maths geek, so I went with a Roman numerals idea –  XXX is 30 in Roman numerals, so I thought I’d make the Xs out of light sabres!

  
I used Stampin’ Up! punches.  The handles of the light sabres are made from the jewelry tag punch. The blades are from the word window punch. 

The Death Star image is one I used on a Yoda birthday card a few months ago. I’ve uploaded the image to Dropbox for anyone who’d like to use it (the link is in the previous Yoda post). 

I made the inside a pop-up card:

  
The good folks at Flaming Text have a Star Wars text generator, which I used to make the image. You can use the image for free as long as you keep on their watermark (which is there in my card, I promise, just hard to see in the photo!)

I hope he likes his card! 

Thanks for reading. 

Caro 

Card gift set (made from upcycled salad container)

28 Thursday Jan 2016

Posted by in 1 3/4 circle, 1 3/8 circle, 2 3/8 inch scallop punch, 3D projects, Birthday, Card sets, Cards, Chalk Talk, General occasion, Gift tags & wrapping, Punches, Scallop Tag Topper, Using up scraps

≈ Leave a comment

Tags

, , , , ,

Hi 

Today I want to show you an idea I had for making a gift boxed set of cards using a plastic container that some salad leaves came in.   

  

When I was getting my rocket leaves out of the fridge a few days ago, I thought that the container would be just right to hold some square cards. 

  

I thought while I was in the upcycling/recycling mood, I should also use up some of my spare paper stash.  So I grabbed some old Bravo Burgundy (Stampin’ Up!) card stock and matching designer series paper, some punches and a pile of paper doilies I had in my “random craft stuff” box, and here’s what I came up with:

  

It was a layering job of DSP and card stock. I used my 2 3/8 inch scallop circle punch and the 1 3/4 and 1 3/8 inch circle punches.   The “For You” sentiment is from the Chalk Talk stamp set.  

   
   

I then decorated the plastic container to match the cards. 

   
  

 A quick tag using the scallop tag topper punch, some matching ribbon and voila!  

   

I made this for someone very special to me who is forever sending cards to other people, so hopefully she enjoyed receiving some cards of her own.  

Thanks for reading. 

Caro x 

Punch art and colouring in baby card

16 Saturday Jan 2016

Posted by in Baby cards, Cards, Curly label, Perfect Polka Dots, Using up scraps, Word Window

≈ Leave a comment

Tags

, , , ,

Happy New Year!

I’m back at my craft desk today after a nice break over Christmas and New Years.  I am visiting a close friend who has had a new baby next week so wanted to make a special card.  

I have seen punch out baby drawer cards all over the Internet and have been itching to make one.  So here’s my version:

  
I used a top gold card blank (cut an A4 sheet in half vertically at 10.5cm) and then cut the shape from the bottom with 2 cuts of the curly label punch.  The drawers are 8cm x 2cm and embossed with my spotty folder for added texture.  The top of the drawers is 11cm x roughly 1.5cm (I just used up a scrap). 

I used Sahara Sand card stock and sponged the edges with Blushing Bride. 

The images are from the Baby Bundle set and the sentiment is from Nursery Necessities (both retired Stampin’ Up! but there are lots of cute baby sets in the current catalogue that would work just as well). 

I cut out all the shapes.   One tip for cutting really tiny shapes like the curve of the coat hanger – if you have a marker the same colour as your card stock just colour around so it’s not obvious if you leave a bit for added strength:

  
It’s a good idea to position the clothes etc before you stick down the drawers – I stuck a few behind the drawers:

  
(I used dimensionals to stick on the drawers and mini glue dots for the fiddly little cut outs). 

I hope you enjoyed that card – and hopefully my friend will too!!!

Thanks for reading. 

Caro 

Punch art and colouring baby card

16 Saturday Jan 2016

Posted by in Baby cards, Cards, Curly label, Perfect Polka Dots, Using up scraps, Word Window

≈ Leave a comment

Tags

, , , ,

Happy New Year!

I’m back at my craft desk today after a nice break over Christmas and New Years.  I am visiting a close friend who has had a new baby next week so wanted to make a special card.  

I have seen punch out baby drawer cards all over the Internet and have been itching to make one.  So here’s my version:

  
I used a top gold card blank (cut an A4 sheet in half vertically at 10.5cm) and then cut the shape from the bottom with 2 cuts of the curly label punch.  The drawers are 8cm x 2cm and embossed with my spotty folder for added texture.  The top of the drawers is 11cm x roughly 1.5cm (I just used up a scrap). 

I used Sahara Sand card stock and sponged the edges with Blushing Bride. 

The images are from the Baby Bundle set and the sentiment is from Nursery Necessities (both retired Stampin’ Up! but there are lots of cute baby sets in the current catalogue that would work just as well). 

I cut out all the shapes.   One tip for cutting really tiny shapes like the curve of the coat hanger – if you have a marker the same colour as your card stock just colour around so it’s not obvious if you leave a bit for added strength:

  
It’s a good idea to position the clothes etc before you stick down the drawers – I stuck a few behind the drawers:

  
(I used dimensionals to stick on the drawers and mini glue dots for the fiddly little cut outs). 

I hope you enjoyed that card – and hopefully my friend will too!!!

Thanks for reading. 

Caro 

Paper craft Christmas table decorations

20 Sunday Dec 2015

Posted by in Boho Blossoms, Christmas, Curly label, Extra Large Oval, Home decorating, Petite curly label, Punches, Scallop oval, Tutorial, Word Window

≈ Leave a comment

Tags

, , , , , , , , ,

Hello!

Today I want to show you some crafts I’ve been making ready to decorate the table on Christmas Day.  This is the first year I’ve hosted Christmas at my house, so wanted to make the table look nice.

I have made laminated and stamped Christmas placemats, Santa hat place setting cards and Santa napkin rings for each guest.

IMG_3769

Laminated and stamped Christmas placemat

IMG_3770

Stamped Christmas place mat

IMG_3771

Punch art Santa hat place cards

IMG_3772

Punch art Santa belt napkin holders

These are all things I’ve featured in my blog in the past.  If you’d like to know how to make them, please check out the older posts for detailed instructions:

  • Laminated and stamped Christmas Placemats click here.
  • Punch art Santa place setting cards – and making the punch art Santa hat – click here.
  • Santa napkin rings – and making a punch art Santa belt – click here.

I’ll try and remember to post a picture of the decorated Christmas table!

Wishing you all the best for a happy Christmas and a safe and fun festive season.

Caro x

 

Homemade advent calendar

28 Saturday Nov 2015

Posted by in 1 1/4 inch circle, 1 inch circle, 3D projects, Home decorating, Star, Tutorial, Washi tape

≈ 2 Comments

Tags

, ,

I am ridiculously excited to show you what I’ve been working on over the past few days – an advent calendar!

  
I’ve just hung it on my wall after extracting solemn promises from Mr 6 that it will not be touched before 1 December! 

This is made with match boxes, a baking tray, magnets and glitter Washi tape to cover the boxes.  I also grabbed a few Christmas decorations to stick on the edge.  (And nothing but super glue worked to stick those suckers onto the metal!)

Here are some photos of how I put it all together:

   
    
    
    

    

  
  
The Washi tape is a Selley’s pack I bought at Costco. 
The numbers are a free download from http://justsomethingimade.com/2009/10/simple-spool-advent-calendars/.  

They work with a 1 inch circle punch.   I also used Stampin’ Up!’s glitter sheets and my  1 1/4 inch circle and star punches as backgrounds for the numbers. 

I stuck magnets on the back of each box so they would stick to the baking tray. 

I also used sticky strip to run sequins along the side edges of the tray and some Washi tape and glitter glue for the top and bottom. 

I stuck it to the wall using 3M removable hanging strips. 

So there you have it – my glittery, sparkly home made advent calendar.  Anyone got any ideas for what to do with hundreds of spare matches? đŸ˜‰ 

Thanks for reading. 

Caro

Star Wars gift bag

24 Saturday Oct 2015

Posted by in 1 3/4 circle, Gift bags, Gift tags & wrapping, Jewellery tag, Kids craft ideas, Kids party, Word Window

≈ Leave a comment

Hello! 

Yesterday I showed you some quick Star Wars themed kids cards I made.  Today I want to show you a simple Star Wars themed gift bag for that little Jedi in your life!

I decorated up a gift bag from the $2 shop:    

   
The picture of the Death Star is sized to fit my 1 3/4 circle punch. The lightsabers are made from the word window and jewellery tag punches.  

I’m a little bit in love with this one!!! 

Caro x

Star Wars kids cards

23 Friday Oct 2015

Posted by in 1 3/4 circle, Birthday, Curly label, Jewellery tag, Kids cards, Kids craft ideas, Masculine, Owl, Word Window

≈ Leave a comment

Tags

, ,

Hello

My 6 year old and all his friends are obsessed with Star Wars at present.  There are a couple of Padawan birthdays coming up over next few weeks so I’ve been looking for some quick Star Wars cards to make. 

Here they are in order of simplicity!!!

   
 
The lightsabers are made with the word window and jewellery punches.   The Death Star is a print out sized to fit my 1 3/4 inch circle punch. (I made it for this yoda card I made a few months ago). 

The next one is basically the same but with the child’s name in Star Wars font – check out the cool tool at logo54.com/movie/starwars

  

I’m not sure you can really file the next card under “quick” but it was still pretty easy! And still didn’t take more than 10 minutes.  

  
Darth Vader and Obi Wan are made from the owl punch.  Vader’s face is the owl’s vest turned upside down with some black fake pearls for eyes.  

I made the cape with the curly label punch turned on its side and trimmed off at the sides:

  
I hope you enjoyed reading this.  And here’s hoping the little Jedis enjoy them too!

Caro